Hot combo for electric skateboard, Electric Longboard kit, electric mountainboard, electric skateboard kit, Electric skateboard Longboard, Hot combo, brushless motor, motor for longboard, skate motor, sensorless motor, 5065 220KV, Skateboard remote, VESC, vedder VESC. On sale!
electric skateboard vescwireless remote controllerbrushless motor, motor for longboard, skate motor, sensorles motor, 5065 220KV,

Hot Combo 5065 220KV sensorless motor+Vedder VESC+Remote for electric skateboard

$293.22 $249.24

Price includes 1 pcs VESC+1pcs 5065 220KV motor+1pcs Remote

Send an inquiry
Please, insert your name
Please, insert your email
Please, insert the message


Product Description

1. Motor specification

5065 220KV motor with no hall sensor

Model NO MTO5065-220-G
Motor KV 220(RPM/V)
Shaft 6mm
Idle Curren 1.2A
Max. Current 50A
Input Volt 2-10Lipo cell
Max. Output Watt 1815W
Max. Pull 6700g
Net Weight 364g
Rated Current 42.5A
Internal Resistance 0.0361
Features Without hall sensor

The motors are suitable for the electric skateboards or electric bikes.

The motors are suitable for the electric skateboards or electric bikes.

The up and bottom caps are made of aluminium alloy.

The motor case is made of steel.

The static balance is confirm.

NSK Japanese bearings

45h sintered ndfeb magnets

Stator is stacked with silicon steel

Use high temperature and oxygen-free copper wire

Stainless steel shaft

High-temperature micro ball-bearing

2. VESC Specification

Application e-skateboard/E-bike
Lipo 3-12Cells
Voltage 8V-60V
Accessory with USB cable
Package W/ Box
Capacitors 3pcs 680uf 63V
Dimension of VESC board 60x40mm
Power wire Silicon wire
Connectors 5.5mm Golden Connectors

3. Wireless remote controller specification

Model NO MTSKR1512
Battery Re-chargeable
Cover Silicon Cover Protection
Application for Skateboard
Accessory With the receiver
Certificate CE ROHS
Materials Plastic
Color Black
Feature small & light&easy to handle

Main features:
Frequency: 2400M-2483MHz
Frequency Channal: 32 channals
Channal: 4 channals TDM
Direction: Bidirectional communication
Battery: 14350 3.7V 450mah
Transmitting distance: 10 meters
Output signal of receiver: PWM
Pulse width: 1-2ms
Midpoint Pulse width 1.5ms
Brake function: Yes.
Constant speed function: Yes.

Maytech VESC Advantages:

  1. The 5.5mm golden connectors are soldered on the VESCs. It costs extra expense and also extra soldering processing method.
  2. Maytech VESCs come with 3pcs pf 680uf 63V capacitors which are soldered on the capacitor PCB. The capacitors are very important for every ESC. They can make sure the ESCs’stability when the ESCs speed up or slow down.

Why do we solder the capacitors on the capacitor PCB?

a)The capacitor PCB can stabilize the 3pcs 680uf 63V capacitors better than those are attached on the cables.

b)The capacitor PCB make the VESC look good and clean.

3. Maytech VESCs come with the USB cables and the sensor cables.

The USB cables are used for programming.

The sensor cables are used for the sensored motors when the original sensor cables on the motors are not compatible with the VESCs.

  1. Maytech uses the genuine Mosfets which come with circles and unclear writing.

However, the substituted Mosfets are with the clear writing and no circles. Many suppliers use the substituted Mosfets because of the lower cost.

maytech vesc,electric skateboard vesc,vesc for skateboard,Vedder's Speed Controller,vedder's vesc,Vedder's Speed Controllermaytech vesc,electric skateboard vesc,vesc for skateboard,Vedder's Speed Controller,vedder's vesc,Vedder's Speed Controller


  1. Maytech uses the genuine 1m Ohm resistors. How to tell the genuine resistors and substituted resistors?

The genuine resistors are the metal plates with numbers and gaps.

The substituted resistors are just the square copper plates.

maytech vesc,electric skateboard vesc,vesc for skateboard,Vedder's Speed Controller,vedder's vesc,Vedder's Speed Controllermaytech vesc,electric skateboard vesc,vesc for skateboard,Vedder's Speed Controller,vedder's vesc,Vedder's Speed Controller

VESC Features

  • The hardware and software is open source. Since there are plenty of CPU-resources left, the customization possibilities are almost endless.
  • STM32F4 microcontroller.
  • DRV8302 MOSFET driver / buck converter / current shunt amplifier.
  • IRFS7530 MOEFETs (other FETs in the same package also fit).
  • 5V 1A output for external electronics from the buck converter integrated on the DRV8302.
  • Voltage: 8V – 60V (Safe for 3S to 12S LiPo).
  • Current: Up to 240A for a couple of seconds or about 50A continuous depending on the temperature and air circulation around the PCB.
  • Sensored and sensorless FOC wich auto-detection of all motor parameters is implemented since FW 2.3.
  • Firmware based on ChibiOS/RT.
  • PCB size: slightly less than 40mm x 60mm.
  • Current and voltage measurement on all phases.
  • Regenerative braking.
  • DC motors are also supported.
  • Sensored or sensorless operation.
  • A GUI with lots of configuration parameters
  • Adaptive PWM frequency to get as good ADC measurements as possible.
  • RPM-based phase advance (or timing/field weakening).
  • Good start-up torque in the sensorless mode (and obviously in the sensored mode as well).
  • The motor is used as a tachometer, which is good for odometry on modified RC cars.
  • Duty-cycle control, speed control or current control.
  • Seamless 4-quadrant operation.
  • Interface to control the motor: PPM signal (RC servo), analog, UART, I2C, USB  or CAN-bus.
  • Wireless wii nunchuk (Nyko Kama) control through the I2C port. This is convenient for electric skateboards.
  • Consumed and regenerated amp-hour and watt-hour counting.
  • Optional PPM signal output. Useful when e.g. controlling an RC car from a raspberry pi or an android device.
  • The USB port uses the modem profile, so an Android device can be connected to the motor controller without rooting. Because of the servo output, the odometry and the extra ADC inputs (that can be used for sensors), this is perfect for modifying an RC car to be controlled from Android (or raspberry pi).
  • Adjustable protection against
    • Low input voltage
    • High input voltage
    • High motor current
    • High input current
    • High regenerative braking current (separate limits for the motor and the input)
    • Rapid duty cycle changes (ramping)
    • High RPM (separate limits for each direction).
  • When the current limits are hit, a soft back-off strategy is used while the motor keeps running. If the current becomes way too high, the motor is switched off completely.
  • The RPM limit also has a soft back-off strategy.
  • Commutation works perfectly even when the speed of the motor changes rapidly. This is due to the fact that the magnetic flux is integrated after the zero crossing instead of adding a delay based on the previous speed.
  • When the motor is rotating while the controller is off, the commutations and the direction are tracked. The duty-cycle to get the same speed is also calculated. This is to get a smooth start when the motor is already spinning.
  • All of the hardware is ready for sensorless field-oriented control (FOC).

Additional Information

Weight 1500 g
Dimensions 80 x 50 x 40 mm